Specs at a glance
-
Process temperature
Any
-
Process pressure absolute / max. overpressure limit
Any
-
Main wetted parts
Non-contact
Field of application
The FQG66 source container is designed to hold the radioactive source with highest activities during radiometric point level detection, continuous level and density measurement. The radiation is emitted almost unattenuated in one direction only, and is damped in all other directions. This guarantees highest safety for the personnel and a reliable measurement.
Encloses the radioactive source used for radiometric point level detection, level and density measurement. Operating with very high sensitivity rod scintillation detectors, provide lowest possible radiation loads in the surrounding.
Used if the shielding effectiveness of smaller source containers (FQG61/62) are too low
Activity: 137Cs 740GBq (20,000mCi), 60Co to 185GBq (5,000mCi)
Process temperature: No limitation (extraneous)
Process pressure: No limitation (extraneous)
Benefits
High safety level thanks to highest safety classification for the source supplied
(DIN 25426/ISO 2919, typically classification C66646) and simple and easy source replacementExtremely high shielding ensures that no control areas are generally required and that installation in accessed areas is possible
Additional metallic protective capsule with O-ring seal to protect the source against mechanical and chemical influences
Low space requirement and simple mounting and various angles of emission for optimum adaption to the application
Padlock for fixation the on/off switch position and to protect against theft
Easy identification of switch status through sight glasses on the cover or by remote display with proximity switches
Videos
-
Radiometric measuring principle
Xpert selection
-
Specialized products
- Designed for demanding applications
Technical excellence
Simplicity
Variable

-
Standard products
- Reliable, robust and low-maintenance
Technical excellence
Simplicity
-
Specialized products
- Designed for demanding applications
Technical excellence
Simplicity
Variable
FLEX selections | Technical excellence | Simplicity |
---|---|---|
Fundamental selection Meet your basic measurement needs |
Technical excellence
|
Simplicity
|
Lean selection Handle your core processes easily |
Technical excellence
|
Simplicity
|
Extended selection Optimize your processes with innovative technologies |
Technical excellence
|
Simplicity
|
Xpert selection Master your most challenging applications |
Technical excellence
|
Simplicity
Variable |
Predecessor
-
Measuring principle
Radiometric
-
Characteristic / Application
Source container
Emission angle: 40 / 20 degrees
435kg -
Specialities
Control area calculation with Applicator
-
Ambient temperature
-55 °C...+100 °C
(-67 °F...+212 °F) -
Process temperature
Any
-
Process pressure absolute / max. overpressure limit
Any
-
Main wetted parts
Non-contact
-
Process connection
Non-contact
-
Measuring principle
Radiometric Density
-
Characteristic / Application
Source container
Emission angle: 5/ 20 / 40 degrees
435kg -
Ambient temperature
-55 °C...+100 °C
(-67 °F...+212 °F) -
Process temperature
Any
-
Process pressure absolute
Any
-
Wetted parts
Non-contact
-
Hygienic
Non-contact
-
Specialities
Control area calculation with Applicator
-
Measuring principle
Radiometric
-
Characteristic / Application
Source container
Emission angle: 40 / 20 degrees
435kg -
Specialities
Sliding source support rod for manual or pneumatic on/ off switching
-
Ambient temperature
-55 °C...+100 °C
(-67 °F...+212 °F) -
Process temperature
Any
-
Process pressure absolute / max. overpressure limit
Any
-
Main wetted parts
Non-contact
-
Process connection
Non-contact
-
Measuring principle
Radiometric Limit
-
Characteristic / Application
Source container
Emission angle: 5 degrees
435kg -
Specialities
Control area calculation with Applicator
-
Ambient temperature
-55 °C...+100 °C
(-67 °F...+212 °F) -
Process temperature
Any
-
Process pressure absolute / max. overpressure limit
Any
-
Main wetted parts
Non- contact
-
Process connection
Non- contact
-
Process connection hygienic
Non- contact
-
Measuring principle
Radiometric Limit
-
Characteristic / Application
Source container
Emission angle: 5 degrees
Approximately 435 kg -
Specialities
Control area calculation with Applicator
-
Ambient temperature
-55 °C ... +100 °C
(-67 °F ...+212 °F) -
Process temperature
Any
-
Process pressure absolute / max. overpressure limit
Any
-
Main wetted parts
Non- contact
-
Process connection
Non- contact
-
Process connection hygienic
Non- contact
Configure to download the CAD drawings of this product
Choose from our suggested options
-
-- selected coding-- selected label99.999,00<%label%>
-
Looking for more options? Please use the individual configurator to continue
-
-- selected coding-- selected label99.999,00<%feature%>
-
<%label%>99.999,00
-
Looking for more options? Please use the individual configurator to continue
-
Process Connection
-
<%label%>99.999,00
-
<%label%>99.999,00
-
-
<%feature%><%coding%><%label%>
-
Prices per piece
-
<%range%><%price%>
-
- Optional add-ons