Specs at a glance
-
Accuracy
(Pt100, -50...200 °C) <= 0,2 K
(Pt100, -58...392 °F) <= 0,4 °F
Field of application
Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals using HART® communication. Swift and easy operation, visualization and maintenance by PC using operating software. Space-saving DIN rail mounting according to IEC 60715 (housing width: 12.6 mm).
Temperature transmitter with HART® -Protocol for converting various input signals into a scalable 4 to 20 mA analog output signal
Input:
Resistance thermometer (RTD)
Thermocouple (TC)
Resistance transmitter (Ω)
Voltage transmitter (mV)
HART® -Protocol for front end unit or panel unit operation using the hand operating module (DXR275, DXR375) or a PC (e.g. ReadWin 2000 or FieldCare)
Installation on DIN rail according to IEC 60715
Benefits
Universal settings with HART®-protocol
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit, NAMUR NE 43 compliant
EMC to NAMUR NE 21, CE
Ex-Certification: ATEX Ex, CSA IS, FM IS
Galvanic isolation
Lean selection
-
Standard products
- Reliable, robust and low-maintenance
Technical excellence
Simplicity
-
Standard products
- Reliable, robust and low-maintenance
Technical excellence
Simplicity
-
Specialized products
- Designed for demanding applications
Technical excellence
Simplicity
Variable
| FLEX selections | Technical excellence | Simplicity |
|---|---|---|
Fundamental selection Meet your basic measurement needs |
Technical excellence
|
Simplicity
|
Lean selection Handle your core processes easily |
Technical excellence
|
Simplicity
|
Extended selection Optimize your processes with innovative technologies |
Technical excellence
|
Simplicity
|
Xpert selection Master your most challenging applications |
Technical excellence
|
Simplicity
Variable |
Loading alternative products
Success stories
-
-
Technical Information (TI)
iTEMP TMT112 HART® DIN rail
Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART ® protocol
EN 30/01/201908/11/201801/10/201022/02/200604/08/2005Language:
English
Version:
30/01/2019
File size:
200.4 KB
File name:
TI00114REN_1519.pdf
-
-
-
Operating Instruction (BA)
iTEMP TMT112 Operating Instructions
with HART
EN 30/11/2019Language:
English
Version:
30/11/2019
File size:
932.5 KB
File name:
BA01977TEN_0119.pdf
-
-
-
Short Instruction (KA)
Brief operating instruction iTEMP HART DIN rail TMT112
Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART ® protocol
EN 01/01/2010Language:
English
Version:
01/01/2010
File size:
1.4 MB
File name:
KA193ra3_0110.pdf
-
-
-
Ex Safety Instruction (XA)
iTEMP TMT112
CSA: Control Drawing IS, NI 141801112
Language:
English
Version:
26/01/2004
File size:
82.6 KB
File name:
141801112.pdf
-
-
-
Ex Safety Instruction (XA)
iTEMP TMT112 ATEX: II2(1)G Ex ia IIC T4/T5/T6 Safety Instructions
ATEX:II2(1)G Ex ia IIC T4/T5/T6
EN 20/06/201601/08/200916/09/2005Language:
English
Version:
20/06/2016
File size:
971.9 KB
File name:
XA00022RA3_1316.pdf
-
-
-
Ex Safety Instruction (XA)
Safety instructions iTEMP® HART® DIN rail TMT112, ATEX II3G
Temperature DIN rail transmitter with HART protocol
EN 01/11/200901/04/2005Language:
English
Version:
01/11/2009
File size:
431.7 KB
File name:
XA055ra3_1109.pdf
-
-
-
Ex Safety Instruction (XA)
iTEMP TMT121/127/128, TMT112, TMT122 ATEX: II 3G: Ex nA IIC T6... T4 Gc Safety Instructions
Safety instructions for electrical apparatus certified for use in explosion-hazardous areas.
EN 15/06/201605/05/201501/11/200901/02/2002Language:
English
Version:
15/06/2016
File size:
646.6 KB
File name:
XA00018RA3_1416.pdf
-
-
-
Ex Safety Instruction (XA)
iTEMP TMT112
FM: Control Drawing IS, NI 141801111
Language:
English
Version:
25/09/2003
File size:
118.8 KB
File name:
141801111.pdf
-
-
-
Certificates FM/CSA (ZD)
Control Drawing CSA iTEMP® TMT112
Temperature Transmitter iTEMP® HART® DIN rail TMT112 Installation Notes for hazardous locations
Language:
English
Version:
06/01/2004
File size:
90.9 KB
File name:
141801112.pdf
-
-
-
Certificates FM/CSA (ZD)
Control Drawing FM iTEMP® TMT112
Temperature Transmitter iTEMP® HART® DINrail TMT112 Installation Notes for hazardous locations
Language:
English
Version:
01/02/2005
File size:
149.4 KB
File name:
141801111.pdf
-