Promag 10L

Electromagnetic

The flowmeter with a weight-optimized sensor and high cost-effectiveness.
Suitable for applications in the water and wastewater industry.

Reduced installation costs – flexible mounting by lap‐joint flange concept (DN < 350/14"). Energy‐saving flow measurement – no pressure loss due to cross section constriction. Maintenance‐free – no moving parts.
Up to 30 % less sensor weight. Nominal diameter: DN 25 to 2400 (1 to 90"). Maximum reduced installation length to DVGW/ISO.

Cost-effective – designed for easy applications and direct integration. Safe operation – display provides easily readable process information. Fully industry-compliant – IEC/EN/NAMUR.
2-line display with push buttons. Device as compact or remote version. HART.

Lap joint flange; lap joint flange, stamped plate: DN 25 to 300 (1 to 12")
Fixed flange: DN 350 to 2400 (14 to 90")

Liner: PTFE; Polyurethane; Hard rubber
Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022)

Volume flow

Volume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s)

9 dm³/min to 162 000 m³/h (2.5 gal/min to 1030 Mgal/d)

PN 16, Class 150

Liner material hard rubber: 0 to +80 °C (+32 to +176 °F)
Liner material polyurethane: –20 to +50 °C (–4 to +122 °F)
Liner material PTFE: –20 to +90 °C (–4 to +194 °F)

Flange material carbon steel: –10 to +60 °C (+14 to +140 °F)
Flange material stainless steel: –40 to +60 °C (–40 to +140 °F)

DN 25 to 300 (1 to 12"): AlSi10Mg, coated
DN 350 to 2400 (14 to 90"): Carbon steel with protective varnish
Sensor connection housing: AlSi10Mg, coated

Powder‐coated die‐cast aluminum

Compact version: IP66/67, type 4X enclosure
Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP68, type 6P enclosure
Transmitter remote version: IP67, type 4X enclosure

2-line display with push buttons
Configuration via local display and operating tools possible

4‐20 mA HART (active)
Pulse/switch output (passive)

None

HART

DC 11 to 40 V
AC 85 to 250 V (45 to 65 Hz)
AC 20 to 28 V (45 to 65 Hz)

cCSAus

CE, C-tick

Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920