Radiometric
Interface measurement
Source Container FQG63

Source Container FQG63 ©Endress+Hauser

Radiometric measuring principle

Radiometric interface measurement

Lightweight radiation source container with flexible extension element

The FQG63 source container is designed to hold the radioactive source during radiometric level, density and interface measurement. The radiation is damped in all directions as long as the source container is switched off. This guarantees highest safety for the personnel and a reliable measurement. If the source is switched on and lowered down into the process tank, it emits the radiation into all directions.

  • Voordelen

    • Highest safety classification for the source supplied (DIN 25426/ISO 2919, typical classification C66646)

    • Reliable measurement due to lightweight container and almost spherical design which provides optimized screening

    • Flexible installation length up to...

  • Toepassingsgebied

    Designed to hold the radioactive source during density and interface measurement.

    • Off-position: Radioactive source located in the source container and screens off radiation

    • On-position: Radioactive source with the flexible extension located in the...

Details

  • Meetprincipe

    Radiometric

  • Characteristic / Application

    Source container with flexible extension element to position the source inside the process vessel (diptube)

    Approximately 87kg

    Adapter flange: 10kg

  • Specialities

    Control area calculation with Applicator

  • Ambient temperature

    -52 °C...+200 °C
    (-61 °F...+392 °F)

  • Process temperature

    max. 400°C (752°F)

  • Process pressure absolute / max. overpressure limit

    Any (diptube)

  • Main wetted parts

    Non-contact

  • Process connection

    Non-contact

  • Meetprincipe

    Radiometric

  • Characteristic / Application

    Source container with flexible extension element to position the source inside the process vessel (diptube)

    Approximately 87kg

    Adapter flange: 10kg

  • Specialities

    Control area calculation with Applicator

  • Ambient temperature

    -52 °C...+200 °C
    (-61 °F...+392 °F)

  • Process temperature

    max. 400°C (752°F)

  • Process pressure absolute / max. overpressure limit

    Any (diptube)

  • Main wetted parts

    Non-contact

  • Process connection

    Non-contact

  • Meetprincipe

    Radiometric

  • Characteristic / Application

    Source container with flexible extension element to position the source inside the process vessel (diptube)

    Approximately 87kg

    Adapter flange: 10kg

  • Specialities

    Control area calculation with Applicator

  • Ambient temperature

    -52 °C...+200 °C
    (-61 °F...+392 °F)

  • Process temperature

    max. 400°C (752°F) (diptube)

  • Process pressure absolute / max. overpressure limit

    Any (diptube)

  • Main wetted parts

    Non- contact

  • Process connection

    Non- contact

  • Meetprincipe

    Radiometric

  • Characteristic / Application

    Source container with flexible extension element to position the source inside the process vessel (diptube)

    Approximately 87kg

    Adapter flange: 10kg

  • Specialities

    Control area calculation with Applicator

  • Ambient temperature

    -52 °C...+200 °C
    (-61 °F...+392 °F)

  • Process temperature

    max. 400°C (752°F)
    (diptube)

  • Process pressure absolute / max. overpressure limit

    Any (diptube)

  • Main wetted parts

    Non- contact

  • Process connection

    Non- contact

  • Process connection hygienic

    Non- contact

  • Meetprincipe

    Radiometric

  • Characteristic / Application

    Source container with flexible extension element to position the source inside the process vessel (diptube)

    Approximately 87 kg

    Adapter flange: 10 kg

  • Ambient temperature

    -52 °C...+200 °C
    (-61 °F...+392 °F)

  • Process temperature

    max. 400°C (752°F) (diptube)

  • Process pressure absolute

    Any

  • Wetted parts

    Non-contact

  • Hygienic

    Non-contact

  • Specialities

    Control area calculation with Applicator

Documenten / handleidingen / software

Accessoires / Spare parts

Nr
Order code
Specification