iTEMP TMT182
Temperature head transmitter

iTEMP TMT182 
Temperature head transmitter ©Endress+Hauser
iTEMP TMT182 
Temperature head transmitter ©Endress+Hauser

Transformation of sensor signals into stable and standardized output signals for all industries

Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals using HART® communication. It can be installed as an intrinsically safe apparatus in Zone 1 hazardous areas. Swift and easy operation, visualization and maintenance by PC using operating software.

  • Voordelen

    • Front end unit or panel unit operation using the hand operating module or PC

    • High accuracy in total ambient temperature range

    • Fault signal on sensor break or short circuit, NAMUR NE 43 compliant

    • EMC to NAMUR NE 21, CE

    • Ex-Certification: ATEX Ex ia and dust...

  • Toepassingsgebied

    • Temperature head transmitter with HART® -protocol for converting various input signals into an scalable 4 to 20 mA analog output signal

    • Input: Resistance thermometer (RTD), thermocouple (TC), Resistance transmitter (Ω), voltage transmitter (mV)

    • HART® -...

Kenmerken en specificaties

Terug

Details

  • Meetprincipe

    Head transmitter

  • Input

    1 x RTD, TC, Ohm, mV

  • Output

    1 x analog 4...20 mA

  • Auxiliary power supply

    11,5...35 V DC (standard-version)

    11,5...30 V DC (Ex-version)

  • Communication

    HART-protocol

  • Installation

    Terminal head form B

  • Accuracy

    (Pt100, -50...200 °C) <= 0,2 K

    (Pt100, -58...392 °F) <= 0,4 °F

  • Galvanic isolation

    yes

  • Certification

    UL Ex IS

    UL Ex NI

    Marine approval

    GOST Ex i

    FM IS,NI,Class I,Div.1+2,Group ABCD

    CSA IS,NI,Class I,Div.1+2,Group ABCD

    ATEX II1G Ex ia IIC T4/T5/T6

    ATEX II3G Ex nA IIC T4/T5/T6

    ATEX II3D

    ATEX II1G Ex ia IIC T6, II3D

    ATEX II3G Ex nA IIC T6, II3D

    FM+CSA IS,NI,Class I,Div.1+2,Group ABCD

    CSA General Purpose

    IECEx Ex ia IIC T6/T5/T4

    ATEX IECEx II1G Ex ia IIC T6 Ga

    NEPSI Ex ia IIC T4-T6

    NEPSI Ex nA II T4-T6

    EAC Ex ia

Documenten / handleidingen / software

Accessoires / Spare parts

Nr
Order code
Specification
    • Order code

      The unit is not repairable

    • Order code 51001112

      Reservedelenset voor TMT181/187/188/182

      (4 schroeven, 6 veren, 10 veerringen)

    • Order code 51000856

      DIN rail montageclip voor koptransmitter

      Geschikt voor de montage van een temperatuur koptransmitter op DIN rail.

    • Order code FXA195-

      Commubox FXA195 (USB)

      USB HART interface ten behoeve van universele configuratie tools (b.v. FieldCare) De stroomuitgang (4..20mA) is intrinsiek veilig uitgevoerd (SIL2, IEC61508) De interface wordt via de bijgeleverde kabel aan een PC of laptop aangesloten. De interface wordt gevoed via USB

    • Order code READWIN-

      ReadWin2000 configuratie/uitleessoftware

      ReadWin2000 configuratie software

    • Order code TAF10-

      Veldbehuizing TAF10

      Geschikt voor alle E+H temperatuur koptransmitters. Gegoten aluminium behuizing IP66. Afmetingen: 100x100x60 mm (bxhxd).

  • Voorganger