Process assembly
Unifit CPA442
Hygienic assembly for the life sciences, food & beverage industries
The Unifit CPA442 process assembly is the simple solution for pH/ORP or oxygen measurement in tanks and pipelines of hygienic and sterile applications. Unifit is designed for inline cleaning and sterilization according to EHEDG and 3A criteria. You can be absolutely sure that your high-quality products are never contaminated but always completely safe.
-
Voordelen
Certified hygienic design: Complies with 3A standard 74-05 and the criteria of EHEDG Class I
No contamination thanks to leak-tight, built-in electrode seal (molded seal)
Electropolished surface prevents build-up of residues (Ra=0.38 µm or 0.76 µm)
Suitable...
-
Toepassingsgebied
Unifit CPA442 is intended for permanent installation in tanks and pipework in:
Food and beverage
Life sciences
Water treatment
Chemicals
It is suitable for use with pressures of up to 12 bar (stainless steel).
Documenten / handleidingen / software
-
Technical Information UniFit CPA 442
Process assembly
For safe installation of 12 mm sensors (Pg 13.5) in the food, beverage,
pharmaceitical and chemical industry.Technische informatie (TI) -
Operating Instructions
Unifit CPA442
Process assembly
For installation of 120 mm sensors in food industry, biotechnology and
chemical industryInbedrijfsstellingsvoorschriften (BA) -
Manufacturer Declaration
TSE/BSE free
Certificaat (ZE) -
Kompetenz in der Flüssigkeitsanalyse
Vom Sensor bis zur schlüsselfertigen Komplettlösung
Branches (FA)03/19Duits -
Expertise in liquid analysis
From sensors to complete turnkey solutions
Branches (FA)03/19Engels -
Jistota v analýze kapalin
Od senzorů po dkompletní odávku na klíč
Branches (FA)01/17Tsjechisch -
Esperti nell’analisi dei liquidi
Dai sensori singoli a soluzioni
complete “chiavi in mano”Branches (FA)01/17Italiaans -
Catálogo Portfolio Analítica
Desde sensores hasta soluciones completas
Branches (FA)01/17Spaans -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Competentie Brochure (CP)08/15Japans -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Competentie Brochure (CP)04/15Engels -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.Competentie Brochure (CP)04/11Engels -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidanceCompetentie Brochure (CP)02/12Engels -
Optimal dosing of oxygen for yeast propagation
Oxymax H COS21D in use in a brewery
Case Studie (CS)09/08Engels -
UniFit H
Productcode: CPA442-
verklaring Number: HE_00679_02.17
Specificatie van de fabrikant: 1935/2004Manufacturer DeclarationDuits , Engels -
InduMax H, Memosens, SmarTec, SmarTec S, TopHit, UniFit H
Productcode: CLD134-, CLD18-, CLS54-, CLS54D-, CLS82D-, CPA442-, CPS441-, CPS441D-, CPS471-, CPS471D-, CPS47D-, CPS77D-
Regio: USA
Keuringsinstantie: 3-A Sanitary StandardsHygienic EquipmentEngels -
InduMax H, Memosens, SmarTec, SmarTec S, TopHit, UniFit H
Productcode: CLD134-, CLD18-, CLS54-, CLS54D-, CLS82D-, CPA442-, CPS441-, CPS441D-, CPS471-, CPS471D-, CPS47D-, CPS77D-
Regio: USA
Keuringsinstantie: 3-A Sanitary StandardsHygienic EquipmentEngels -
UniFit H, TopHit, SmarTec S, SmarTec, ProbFit H, Memosens, InduMax H, CleanFit H
Productcode: CLS54D-, CLS82D-, CPA442-, CPS441-, CPS441D-, CPS471-, CPS471D-, CLD134-, CLD18-, CLS54-
Regio: USA
Keuringsinstantie: 3-A Sanitary StandardsFood SafetyEngels
Accessoires / Spare parts
- ???Toon als PDF???
-
-
Nr 3 Order code 51507169
O-RING SET FPM CPA442, FDA CONFORM
-
Nr 3 Order code 71265146
Sealing set FPM CPA442, pharma CoC cert.
-
Nr 3 Order code 51507170
CPA 442 AFDICHTINGSSET EPDM
-
Nr 3 Order code 71265148
Sealings EPDM CPA442, pharma CoC cert.
-
Nr 3 Order code 51507171
O-RING SET SILICOON CPA442, FDA-CONFORM
-
-
-
Nr 2 Order code 71214967
Kit CPA442: Union nut G11/4" brass
Kit CPA442: Union nut G11/4" brass nickel-plated brass, includes Snap ring
-
Nr 2 Order code 71214968
Kit CPA442: Union nut G11/4", 316Ti
Kit CPA442: Union nut G11/4", 316Ti includes Snap ring
-
-
-
Nr 1 Order code 71214966
Kit CPA442: Protection cover POM/316Ti
Kit CPA442: Protection cover POM/316Ti
-
-
-
Order code 51508049
-
Order code 51508050
-
Order code 51508051
Lassok tbv CPA 442 lengte 30 mm
Material 1.4435, DN25-G1 1/4" for CPA442-A
-
Order code 51508052
-
Order code 71213701
Dummy plug 1.4435, G 1 1/4" internal
-
Order code 71213702
Dummy plug 1.4435, G 1 1/4" internal
-
-
Voorganger
-
Opvolger
