Manual or automatic retractable assembly Cleanfit CPA473
Assembly with ball valve for the chemical, paper, and wastewater industries
The Cleanfit CPA473 retractable assembly is designed for application in fibrous or sticky media. Its patented sleeve seals and integrated scrapers make sure that nothing sticks to the sensor. Cleanfit offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.
-
Eenvoudige producten
- Gemakkelijk te selecteren, installeren en gebruiken
Technische topkwaliteit
Eenvoud
-
Standaardproducten
- Betrouwbaar, robuust en onderhoudsarm
Technische topkwaliteit
Eenvoud
-
Gespecialiseerde producten
- Ontworpen voor veeleisende applicaties
Technische topkwaliteit
Eenvoud
Variabel
FLEX selectie | Technische topkwaliteit | Eenvoud |
---|---|---|
Fundamental selectie Voldoe aan uw basismeetvoorwaarden |
Technische topkwaliteit
|
Eenvoud
|
Lean selectie Beheers eenvoudig uw belangrijkste processen |
Technische topkwaliteit
|
Eenvoud
|
Extended selectie Optimaliseer uw processen met innovatieve technologieën |
Technische topkwaliteit
|
Eenvoud
|
Xpert selectie Beheers uw meest uitdagende applicaties |
Technische topkwaliteit
|
Eenvoud
Variabel |
-
Overzicht specificaties
-
Process temperature
PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder: up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi) -
Process pressure
PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)
-
Snelle selectie
Individuele configuratie
-
Voordelen
Safe and reliable separation from the process by ball valve, even under harsh conditions
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
...
-
Toepassingsgebied
Cleanfit CPA473 is intended for use in tanks and pipes in:
Chemical industry
Paper industry
Wastewater / industrial water
Power plants
Refuse incinerators
It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA...
Documenten / handleidingen / software
-
Technical Information Topcal S CPC310
Fully automatic measuring, cleaning and calibration system in hazardous
and non-hazardous areasTechnische informatie (TI) -
Technical Information Retractable assembly Cleanfit P CPA473
Retractable stainless steel process assembly with ball valve, for pH and
ORP electrodesTechnische informatie (TI) -
Operating Instructions Cleanfit P CPA473
Retractable SS process assembly with ball valve for pH and redox
sensorsInbedrijfsstellingsvoorschriften (BA) -
Sonderdokumentation Sicherheitskit CPA473/474
Special documentation Safety kit CPA473/474
Sicherheitskit CPA473/474
Safety kit CPA473/474Speciale Documentatie (SD) -
SD CleanFit Servicekits / Spare part kits
CleanFit Wechselarmaturen / Retractable assemblies
Speciale Documentatie (SD) -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Competentie Brochure (CP)08/15Japans -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Competentie Brochure (CP)04/15Engels -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.Competentie Brochure (CP)04/11Engels -
pH-Messung in Industrieprozessen
Auswahl- und Engineering-Hilfe für verschiedene Industriebranchen und
ApplikationenCompetentie Brochure (CP)03/20Duits -
pH measurement in industrial processes
Selection and engineering guide for different industries and
applicationsCompetentie Brochure (CP)02/20Engels -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidanceCompetentie Brochure (CP)02/12Engels -
Inline-Messung in Maischen
pH- und Dichtemessung überwachen Stärkeaufschluss und Vergärung
Case Studie (CS)08/11Duits -
pH-Messung erhöht Prozesssicherheit
DAW setzt bei Qualitätskontrolle auf Inlinemessung
Case Studie (CS)02/20Duits -
pH measurement increases process safety
DAW relies on inline measurement for quality control
Case Studie (CS)02/20Engels -
Comment la mesure du pH augmente la sécurité des process
DAW s’appuie sur des mesures en ligne pour son contrôle qualité
Case Studie (CS)02/20fr -
CleanFit P
Productcode: CPA473-
verklaring Number: HE_01349_01.20
Specificatie van de fabrikant: PEDManufacturer DeclarationDuits , Engels -
CleanFit P
Productcode: CPA473-, CPA474-
verklaring Number: HE_01323_01.20
Specificatie van de fabrikant: Explosion protectionManufacturer DeclarationDuits , Engels
Accessoires / Spare parts
-
-
Order code 71217189
Manual Kits CPA473 2013
-
Order code 51512677
Kit CPA473 korte versie, intrekbaar
-
Order code 51512678
KIT CPA473 electr. guide long
-
Order code 51503774
CPA471/472 cylinder PA lang
-
Order code 71042130
KIT CPA473/474 cylinder PA long
-
Order code 71329949
KIT CPA47X: Throttel check valve
-
Order code 51503776
CPA 471 KIT CYLINDER
-
Order code 71042134
KIT CPA473/474 cylinder 1.4404 long
-
Order code 51512689
CPA473 SPOELHUIS
-
Order code 71082107
Kit CPA47: intermediate flange ball valv
-
Order code 71329946
KIT CPA473/474: Rinse nozzle G1/8-G1/4
-
Order code 71329947
KIT CPA473/474: Rinse nozzle G1/8-NPT1/4
-
Order code 51511929
CPA473 PNEUMATISCH VENTIEL
-
Order code 51511934
Uitloopklep pneumatisch CPA473 NPT1/4"
-
Order code 71240620
Kit CPA47x Outlet valve: O-rings Viton
-
Order code 51511937
CPA47x veiligheids zegel G ¼
-
Order code 51511938
CPA47x veiligheids zegel NPT ¼
-
Order code 51511939
CPA47X VEILIGHEIDS ZEGEL G ¼
-
Order code 51511940
CPA47x veiligheids zegel NPT ¼
-
Order code 51512698
CPA473 B
-
Order code 51512707
CPA473 PNEUMATISCHE AANDRIJVING KOMPLEET
-
Order code 51512708
CPA473 KOGELKR. COMPL. ELECTR. POS.
-
Order code 71099157
Kit CPA473, KCI pipe pneumatic
-
Order code 71099159
Kit CPA473 KCl-pipe manual
-
Order code 51503716
CPA471/472 PNEUM.RE.PIPE GEL 225MM
-
Order code 51503718
KIT CPA471/472 Elek.buis Gel Hand Lang
Retractable elektrode geleide buis voor Gel sensoren 225 mm
-
Order code 51513005
CPA473 Retractable pipe 360mm Pneumatic
-
Order code 51513006
KIT CPA473/474 manual, re.pipe gel 360mm
Uitschuifbare pijp voor gel sensor 360 mm
-
Order code 51502874
Pneumatische eindschakelaar (2st)
-
Order code 71329948
KIT CPA473/474: Electr. proxim.switches
-
Order code 51503731
CPA471 borgings schoef
-
Order code 71361237
Kit Sensor output interface
-
Order code 51511871
CPA473 O-ringset EPDM
-
Order code 51518480
O-ring set EPDM voor CPA473
-
Order code 51511872
CPA473 O-RING SET VITON
-
Order code 51518481
O-Ring set Viton voor CPA473
-
Order code 51511873
CPA473 O-ringset perfluorlast
-
Order code 51518482
CPA473 O-ring set Kalrez
-
Order code 71064624
CPA471...5 afdictingen z medium contact
Voor alle afdichtingen zonder medium contact.
-
Order code 51517522
Kap tegen spatwater voor armaturen
-
Order code 51503730
-
Order code C-PA080116-40
-
Order code C-PA080116-41
-
Order code 71065927
CPA473 Afdichting EPDM Proces zijde
-
Order code 71065929
CPA473 afdicht+mediacontact FPM >10/07
-
Order code 71065930
CPA473 Seals w.media contact KALRE>10/07
-
Order code 71065932
CPA473 EPDM: Scrapers f.ball valve>10/07
-
Order code 71065933
CPA473 FPM: Scrapers f.ball valve>10/07
-
Order code 71065934
CPA473 KALRE: Schrapers f.ballvalve> 10.
-
Order code 71065935
CPA473 EPDM Dichtbuchse
-
Order code 71065937
CPA473 FPM: Sealing bush Variseal>10/07
-
Order code 71065938
CPA473 KALREZ: Seal. bush Variseal> 10.0
-
Order code 71065951
Kit CPA473: Flange DN50 1.4404 acc. DIN
-
Order code 71065952
Kit CPA473: Flange ANSI 2" 1.4404
-
Order code 71240615
Kit CPA473: Sleeve short PEEK/EPDM
-
Order code 71240616
Kit CPA473: Sleeve short PEEK/Kalrez
-
Order code 71240610
Kit CPA473: Sleeve short PEEK/Viton
-
Order code 71240618
Kit CPA473: Sleeve long PEEK/EPDM
-
Order code 71240619
Kit CPA473: Sleeve long PEEK/Kalrez
-
Order code 71240617
Kit CPA473: Sleeve long PEEK/Viton
-
Order code 71071451
Kit CPA473/474: Connection block pneumat
-
-
Voorganger