High-temperature flowmeter for process applications with a compact, easily accessible transmitter
Dedicated to chemical and process applications with corrosive liquids and high medium temperatures
Diverse applications – wide variety of wetted materials
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments
Expandable multiparameter field device for all industries
Suitable for all digital Memosens sensors
Modular, flexible and easily expandable
Features all common communication protocols and interfaces
Memosens glass electrode for standard applications
Dirt-repellent PTFE ring diaphragm
For highly alkaline media
Approved for hazardous area use
Level measurement in liquids for water & wastewater and utilities in all industries
Non-contact best price-performance-ratio radar with Bluetooth® commissioning, operation and maintenance app. Commissioning also via HART or remote display possible
Most compact radar due to unique chip design
Temperature: -40 to +80°C (-40 to +176°F), Pressure: -1 to +3bar (-14.5 to +43psi), Accuracy: ±2mm
The standard sensor for highest demands in liquid level measurement with 80GHz technology
Non-contact, non-invasive, maintenance-free measurement in liquids
SIL2 according IEC 61508, SIL3 in homogeneous redundancy
Temperature: –40 to +130°C (–40 to +266°F), Pressure: –1 to +16bar (–14.5 to +232psi)
Cost effective point level switch for water-based liquids
Compact capacitive probe for point level detection
Hygienic design for the food industry - approved by EHEDG and 3-A
Temperature: -20 to +100°C (-4 to +212°F); Pressure: -1 to 16bar (-14.5 to 232psi)
World's only intrinsically safe HART/USB interface for Device & FieldCare and FieldXpert software
Connects intrinsically safe Smart transmitters with HART protocol to the USB interface of a Windows System.
Power is supplied to the Commubox by means of the USB interface.
Remote operation of the transmitters possible with the aid of the Endress+Hauser FieldCare software.
Deze site gebruikt cookies. Door verder te gaan met browsen op deze site gaat u akkoord met het gebruik van cookies.
Meer informatie hier