Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.

Deltatop DO65F

Deltatop DO65F - Differential pressure flow ©Endress+Hauser

This product is no longer available.

Please check new generation in the section predecessor / successor or contact your local Endress+Hauser entity.

Features and specifications

Back

Details

  • Measuring principle

    Differential pressure

  • Product headline

    Calculated volume or mass flow measurement. dp primary element (orifice).
    Orifice meter run with annular chamber corner taps.

  • Sensor features

    Internationally standardized.
    Including pipe section.
    Small pipe sizes DN10...50 ; 3/8...2".
    Exchangeable orifice plate.
    Compact or remote design.
    Optimizable for minimized pressure loss, improved uncertainty or maximized Turndown.
    Deltabar S/M differential pressure transmitter.

  • Nominal diameter range

    DN 10...50
    3/8" ... 2"

  • Max. measurement error

    typically < 1,5% of calculated volume or mass.
    DN < 25 / 1" calibration recommended.
    Uncertainty of primary element excluding uncertainty of density or compensation.

  • Measuring range

    0.4 ... 550m3/h

  • Max. process pressure

    PN6 ... 160
    Cl.150 ... 2500

  • Medium temperature range

    Compact version:
    -200°C ... 200°C
    -328°F ... 392°F
    Remote version:
    -200°C ... 1000°C
    -328°F ... 1832°F

  • Degree of protection

    Transmitter (Deltabar):
    IP67
    NEMA6P

  • Display/Operation

    Transmitter (Deltabar):
    4-line display
    3 push buttons
    Quick setup
    HistoROM

  • Outputs

    Transmitter (Deltabar):
    4 ... 20 mA

  • Digital communication

    Transmitter (Deltabar):
    HART
    PROFIBUS PA
    FOUNDATION Fieldbus

  • Hazardous area approvals

    Transmitter (Deltabar):
    ATEX
    FM
    CSA
    IEC
    TIIS
    NEPSI

  • Measuring principle

    Differential pressure

  • Product headline

    Calculated volume or mass flow measurement. dp primary element (orifice).
    Orifice meter run with annular chamber corner taps.

  • Sensor features

    Internationally standardized.
    Including pipe section.
    Small pipe sizes DN10...50 ; 3/8...2".
    Exchangeable orifice plate.
    Compact or remote design.
    Optimizable for minimized pressure loss, improved uncertainty or maximized Turndown.
    Deltabar S/M differential pressure transmitter.

  • Nominal diameter range

    DN 10...50
    3/8" ... 2"

  • Max. measurement error

    typically < 1,5% of calculated volume or mass.
    DN < 25 / 1" calibration recommended.
    Uncertainty of primary element excluding uncertainty of density or compensation.

  • Measuring range

    0.4 ... 550m3/h
    2.0 ... 2750 kg/h at 10bar/230°C

  • Max. process pressure

    PN6 ... 160
    Cl.150 ... 2500

  • Medium temperature range

    Compact version:
    -200°C ... 200°C
    -328°F ... 392°F
    Remote version:
    -200°C ... 1000°C
    -328°F ... 1832°F

  • Degree of protection

    Transmitter (Deltabar):
    IP67
    NEMA6P

  • Display/Operation

    Transmitter (Deltabar):
    4-line display
    3 push buttons
    Quick setup
    HistoROM

  • Outputs

    Transmitter (Deltabar):
    4 ... 20 mA

  • Digital communication

    Transmitter (Deltabar):
    HART
    PROFIBUS PA
    FOUNDATION Fieldbus

  • Hazardous area approvals

    Transmitter (Deltabar):
    ATEX
    FM
    CSA
    IEC
    TIIS
    NEPSI

  • Measuring principle

    Differential pressure

  • Product headline

    Calculated volume or mass flow measurement. dp primary element (orifice).
    Orifice meter run with annular chamber corner taps.

  • Sensor features

    Internationally standardized.
    Including pipe section.
    Small pipe sizes DN10...50 ; 3/8...2".
    Exchangeable orifice plate.
    Compact or remote design.
    Optimizable for minimized pressure loss, improved uncertainty or maximized Turndown.
    Deltabar S/M differential pressure transmitter.

  • Nominal diameter range

    DN 10...50
    3/8" ... 2"

  • Max. measurement error

    typically < 1,5% of calculated volume or mass.
    DN < 25 / 1" calibration recommended.

  • Measuring range

    0.02 ... 40m3/h

  • Max. process pressure

    PN6 ... 160
    Cl.150 ... 2500

  • Medium temperature range

    Compact version:
    -200°C ... 200°C
    -328°F ... 392°F
    Remote version:
    -200°C ... 1000°C
    -328°F ... 1832°F

  • Degree of protection

    Transmitter (Deltabar):
    IP67
    NEMA6P

  • Display/Operation

    Transmitter (Deltabar):
    4-line display
    3 push buttons
    Quick setup
    HistoROM

  • Outputs

    Transmitter (Deltabar):
    4 ... 20 mA

  • Digital communication

    Transmitter (Deltabar):
    HART
    PROFIBUS PA
    FOUNDATION Fieldbus

  • Hazardous area approvals

    Transmitter (Deltabar):
    ATEX
    FM
    CSA
    IEC
    TIIS
    NEPSI

Documents / Manuals / Software

Accessories / Spare parts

Nr
Order code
Specification
    • Order code 71071897

      Screw set UNF7/16x1-3/4", steel, Viton

      Consists of: 4x screw, length 1-3/4", steel. 2x seal FKM Viton. Usage: manifold, milled. DA63M, DPD61D/DPD62D/DPD63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71071899

      Screw set UNF7/16x1-3/4", steel, PTFE

      Consists of: 4x screw, length 1-3/4", steel. 2x seal PTFE. Usage: manifold, milled. DA63M, DPD61D/DPD62D/DPD63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71071900

      Screw set UNF7/16x2-1/4", steel, Viton

      Consists of: 4x screw, length 2-1/4", steel. 2x seal FKM Viton. Usage: manifold, forging. DA63M, DPD61D/DPD62D/DPD63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71071901

      Screw set UNF7/16x2-1/4", steel, PTFE

      Consists of: 4x screw, length 2-1/4", steel. 2x seal PTFE. Usage: manifold, forging. DA63M, DPD61D/DPD62D/DPD63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71285305

      Screw set UNF7/16x1-3/4", VA, Viton

      Consists of: 4x screw, length 1-3/4", VA. 2x seal FKM Viton. Usage: manifold, milled. DA63M, DP61D/DP62D/DP63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71285307

      Screw set UNF7/16x1-3/4", VA, PTFE

      Consists of: 4x screw, length 1-3/4", VA. 2x seal PTFE. Usage: manifold, milled. DA63M, DP61D/DP62D/DP63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71285308

      Screw set UNF7/16x2-1/4", VA, Viton

      Consists of: 4x screw, length 2-1/4", VA. 2x seal FKM Viton. Usage: manifold, forging. DA63M, DP61D/DP62D/DP63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.

    • Order code 71285310

      Screw set UNF7/16x2-1/4", VA, PTFE

      Consists of: 4x screw, length 2-1/4", VA. 2x seal PTFE. Usage: manifold, forging. DA63M, DP61D/DP62D/DP63D, DO61W/DO62C/DO63C/DO65F. Not for manifold + connection IEC61518, both side.